Revision [3157]
This is an old revision of EdgerouterXSetup made by ZorrUno on 2018-06-13 12:50:01.
Ubiquiti Edgerouter X Setup
Quickstart guide from Ubiquiti
https://dl.ubnt.com/guides/edgemax/EdgeRouter_ER-X_QSG.pdf
Setup for fibre
https://www.youtube.com/watch?v=9WRY8yU6qAk
- Using Spark for ISP
- You need to connect to port0 of the router with a fixed IP in the 192.168.1.0/24 range (no DHCP on by default)
- I ran the Wizard, 2LAN2 network
- Spark WAN is PPPoE, VLAN 10 tagged, user and password not specific (anything will do, but it does need one of each)
Setup tutorial
https://www.geekzone.co.nz/forums.asp?forumid=66&topicid=205740
Open WRT is possible to install (but I didn't try)
https://wiki.openwrt.org/toh/ubiquiti/ubiquiti_edgerouter_x_er-x_ka
Example: ER-X 1 WAN and 3 Separate LAN
https://community.ubnt.com/t5/EdgeRouter/ER-X-1-WAN-and-3-Separate-LAN/td-p/1858770
Example: Guest Isolation
https://www.youtube.com/watch?v=baj3747yfos
Example: Guest Network
https://blog.gruby.com/2015/07/05/setting-up-a-guest-network-with-the-edgerouter-lite/
Example: Port Isolation
https://www.youtube.com/watch?v=baj3747yfos
Chromecast across subnets (I needed to refer to this, but most of it is old for the ER-X)
http://www.cron.dk/edgerouter-and-chromecast/
https://community.ubnt.com/t5/EdgeMAX/Multicast-Sonos-Phorus-amp-Play-Fi-Broadcast-255-255-255-255-lt/m-p/1274704#M68126
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1061122
What I ended up needing to do (also easy to do in the GUI):
set service mdns repeater interface eth1 set service mdns repeater interface switch0
Example: Home Setup with VPN
https://www.gregpakes.co.uk/setting-up-edgerouter-x-with-lan-segregation-and-vpn-access/