zorruno wikki: Sinilink USB XY-WFUSB Tasmota Flash

Sinilink USB XY-WFUSB Tasmota Flash


XY-WFUSB

This is a USB A Male to female stick, with an esp8266 in it to switch the output. It can be flashed with Tasmota, but has annoyingly small 1.27mm pitch headers. I used the 'sewing pin' method suggested in a couple of places.

If I was doing more of them, I'd make up a more permanent jig or use a more suitable programming tool (I'd at least have looked harder for my logic test clips...) but this worked out easier than I expected, and of course was helped with a decent magnifying lamp.

XY-WFUSB Flashing Tasmota 1

XY-WFUSB Flashing Tasmota 2


Tasmota Template and pinout
https://templates.blakadder.com/sinilink_XY-WFUSB.html

Other links
https://www.cnx-software.com/2020/03/12/sinilink-wifi-usb-power-switch-works-with-tasmota-firmware-supports-up-to-20v-5a/

Sinilink XY-WFUSB
https://www.aliexpress.com/item/4000852320684.html

Programming pin tool
https://www.aliexpress.com/item/32827181680.html

Another method of connecting to closly spaced pins
https://github.com/zoobab/DirtyJTAG/blob/master/docs/install-stlinkv2-swd.md

Last edited by ZorrUno
Sun, 17 May 2020 07:39 UTC [diff]


--
CategoryHomeAutomation
CategoryMicrocontrollers
CategoryTasmota