Revision [5341]
This is an old revision of alt-f-dlinknas made by ZorrUno on 2020-04-20 08:42:56.
Setting up Alt-f Firmware on Dlink DNS-320L Nas
Summary
-- These are cheap 2-bay NASs-- I have DNS-320L
-- Firmware is rubbish
-- Alt-F is a replacement
Non persistant File system
On Alt-F, by contrary, any change will be lost in the next reboot. The exception is a set of well defined files, the "Settings", that are saved in flash memory and loaded on the next reboot (or on demand), and that overrides the defaults.To override this, there is a set of files in /Alt-F that will be pulled on boot to overlay on the existing file system. eg to change loadsave_settings
aufs.sh -n
mkdir -p /Alt-F/usr/sbin
cp /usr/sbin/loadsave_settings /Alt-F/usr/sbin/loadsave_settings
mkdir -p /Alt-F/usr/sbin
cp /usr/sbin/loadsave_settings /Alt-F/usr/sbin/loadsave_settings
edit /Alt-F/usr/sbin/loadsave_settings and fix the error
aufs.sh -r