Notes for Moes Zigbee Scene Switch

Summary

-- A 1,2,3 or 4 button zigbee Scene switch
-- Comes in White, Black and (Harder to get) grey
-- Link from Aliexpress https://www.aliexpress.com/item/1005002220416879.html
-- Cost each for the 4 gang was around $25 each including freight, 4 week delivery (e-packet)
-- They take CR2430 button cell batteries that should last over a year or maybe two. These aren't that common though (I got mine from Jaycar), but a 2032 will apparently fit ok if needed.
-- I connected via a Sonoff zigbee bridge flashed with Tasmota (Zigbee)
-- I just used Node Red to pull the MQTT topics and interrogate the JSON to command various things, but obviously there are plenty of other ways to do it in HA or with direct rules in the zigbee bridge.

Notes

-- I couldn't get all the double press/hold options that the Tuya connection should get. They are supposed to allow for double presses and a HOLD for each button.
-- More options may be supported with Zigbee2Mqtt.
-- With the tasmota setup, I could get single presses from each, and a hold from the right hand switches (no double presses)
-- This setup was fine for what I wanted, but I did start playing with double press detection in Node Red... it wouldn't detect fast presses, but half a second apart I could do.
-- It has been noted that there are some delay quirks with these... occasionally it won't recognise a press if another press has been received a few seconds before. This hasn't really been a problem for my setup (basic light control and a a couple of script actions - all have feedback)

Photos

Relevant Links

https://www.youtube.com/watch?v=I5S9BDX-d-Y
https://www.moeshouse.com/collections/zigbee-scene-switch
https://community.home-assistant.io/t/zigbee2mqtt-tuya-4-button-scene-switch-ts0044/274735?page=2

MQTT JSON results from the sonoff Bridge

Where Zigbee name has been changed to "Moes_Quad_Scene"
And the ID of this device is 0x1234
Topic in MQTT will be something like "tele/tasmota_zigbee_bridge_1/1234/SENSOR/"
where the 1234 is the device ID

Remember with the zigbee bridge, in the console you can change the name to the friendly name thus:

ZbName 0x1234,Moes_Quad_Scene

Top Left Button Pressed

{"ZbReceived":{
	   "Moes_Quad_Scene"{ 
			"Device":"0x1234",
			"Name":"Moes_Quad_Scene",
			"0006!01":"", 
			"Power":1,
			"Endpoint":1,
			"LinkQuality":42}
	   }
}

Bottom Left Button Pressed

{"ZbReceived":{
	   "Moes_Quad_Scene"{ 
			"Device":"0x1234",
			"Name":"Moes_Quad_Scene",
			"0006!00":"", 
			"Power":0,
			"Endpoint":1,
			"LinkQuality":42}
	   }
}

Top Right Button Pressed

{"ZbReceived":{
	   "Moes_Quad_Scene"{ 
			"Device":"0x1234",
			"Name":"Moes_Quad_Scene",
			"0008!02":"00330A00", 
			"DimmerStepUp":51,
			"Endpoint":1,
			"LinkQuality":42}
	   }
}

Bottom Right Button Pressed

{"ZbReceived":{
	   "Moes_Quad_Scene"{ 
			"Device":"0x1234",
			"Name":"Moes_Quad_Scene",
			"0008!02":"01330A00", 
			"DimmerStepDown":51,
			"Endpoint":1,
			"LinkQuality":42}
	   }
}

Top Right Button Held
-- Note that when held, and button is released, a different message is generated on release (I haven't listed those here, as I didn't need them)

{"ZbReceived":{
	   "Moes_Quad_Scene"{ 
			"Device":"0x1234",
			"Name":"Moes_Quad_Scene",
			"0008!01":"0033", 
			"DimmerMove":0,
			"Endpoint":1,
			"LinkQuality":42}
	   }
}

Bottom Right Button Held

{"ZbReceived":{
	   "Moes_Quad_Scene"{ 
			"Device":"0x1234",
			"Name":"Moes_Quad_Scene",
			""0008!01":"0133", 
			"DimmerMove":1,
			"Endpoint":1,
			"LinkQuality":42}
	   }
}

Last edited by ZorrUno
Sun, 10 Oct 2021 02:32 UTC [diff]

CategoryHomeAutomation
CategoryMQTT
CategoryNodeRed

zorruno wikkiMoesZigbeeSceneButtons