Docker – zorruno.com

27 January 2022

WH1080 Fine Offset Weather Station Reset

I have a low cost WH1080 USB Weather station, connected by USB to an intel NUC running docker (x86). These weather stations have a bug in that they occasionally lock up and stop sending data. I implemented an automated way to reset it.

Home Automation/Weather Comments: 0

27 May 2021

zigbee2mqtt Setup in Docker for Home Automation

a setup to allow off the shelf zigbee devices to report to a mqtt server. Total cost

Home Automation/IT & Networking/Technology Comments: 0

12 April 2021

Internet Speed test to InfluxDB & MQTT with Docker

Use of the Ookla speedtest cli to test the internet connection regularly, and push the results to influx db & MQTT.

Home Automation/IT & Networking Comments: 0

3 November 2020

Using an SDR and RTL_433 in docker with MQTT

Mainly to grab weather station data, but also useful for other 433MHz data, this is the setup I use in Docker. It uses a cheap Realtek USB SDR, and pushes data received straight to an MQTT server.

Home Automation/Weather Comments: 0

21 September 2020

Using nsupdate to update a DNS server using docker

Summary This sets up a continual check (using cron) to obtain the current external IP, and if it has changed from the last check, update the remote dns server (that you need full access to). Notes do not as yet show how to set up the dns server and certs. Suggestions for simplifying welcome, maybe holding the current IP address...

Home Automation/IT & Networking Comments: 0

2 June 2020

USB Weather Station & Weewx using Docker

Use of a Low cost WH1080 USB Weather station, connected by USB to an intel NUC running docker.
Weewx pushes data to a local MQTT server (on the same NUC) and also uses SFTP to push graphs and displays to my commercial webserver.

Home Automation/Weather Comments: 0

Tag: Docker

WH1080 Fine Offset Weather Station Reset

zigbee2mqtt Setup in Docker for Home Automation

Internet Speed test to InfluxDB & MQTT with Docker

Using an SDR and RTL_433 in docker with MQTT

Using nsupdate to update a DNS server using docker

USB Weather Station & Weewx using Docker

Flashing a Mi Home 1S LED Desk Lamp with ESPHome

My Polaroid Instant Cameras, 1969 – 2000

Replacing ESPresense with Bermuda for BLE tracking

mmWave occupancy, ESP32 and LD2410 (UART)

mmWave occupancy, ESP32 and LD1125H

MAME Cabinet Raspberry Pi 4

Automating “should be the bins be out… and are they?”

700km Drive in the Atto 3

Dual Dashcam for the BYD Atto 3

Home EV Wallcharger Setup & Installation Tips