Weatherstation – zorruno.com

27 January 2022

WH1080 Fine Offset Weather Station Reset

I have a low cost WH1080 USB Weather station, connected by USB to an intel NUC running docker (x86). These weather stations have a bug in that they occasionally lock up and stop sending data. I implemented an automated way to reset it.

Home Automation/Weather Comments: 0

3 November 2020

Using an SDR and RTL_433 in docker with MQTT

Mainly to grab weather station data, but also useful for other 433MHz data, this is the setup I use in Docker. It uses a cheap Realtek USB SDR, and pushes data received straight to an MQTT server.

Home Automation/Weather Comments: 0

2 June 2020

USB Weather Station & Weewx using Docker

Use of a Low cost WH1080 USB Weather station, connected by USB to an intel NUC running docker.
Weewx pushes data to a local MQTT server (on the same NUC) and also uses SFTP to push graphs and displays to my commercial webserver.

Home Automation/Weather Comments: 0

17 May 2020

Sinilink USB XY-WFUSB Tasmota Flash

Summary Pics and notes for flashing a Sinilink USB Stick XY-WFUSB with Tasmota This is a USB A Male to female stick, with an esp8266 in it to switch the output. It can be flashed with Tasmota, but has annoyingly small 1.27mm pitch headers. I used the ‘sewing pin’ method suggested in a couple of places. If I was doing...

Home Automation Comments: 0

10 June 2015

How about some Raspberry Pi

The Raspberry Pi is a low cost, credit-card sized computer that plugs into a computer monitor or TV, and uses a standard keyboard and mouse. It is a capable little device that enables people of all ages to explore computing, and to learn how to program in languages like Scratch and Python. There are lots of different things you can...

DIY Projects/Education/Projects/Technology/Weather Comments: 0

Tag: Weatherstation

WH1080 Fine Offset Weather Station Reset

Using an SDR and RTL_433 in docker with MQTT

USB Weather Station & Weewx using Docker

Sinilink USB XY-WFUSB Tasmota Flash

Replacing ESPresense with Bermuda for BLE tracking

mmWave occupancy, ESP32 and LD2410 (UART)

mmWave occupancy, ESP32 and LD1125H

MAME Cabinet Raspberry Pi 4

Automating “should be the bins be out… and are they?”

700km Drive in the Atto 3

Dual Dashcam for the BYD Atto 3

Home EV Wallcharger Setup & Installation Tips

Appliance Completion Notification with Node Red

Tasmota Rules Examples

zorrunodotcom